+91-20-24477218 / 24494150Monday - Saturday 10:00 AM - 6:00 PM

Y type strainers

Y type strainers are named after their typical shape. These strainers are used to remove solids from flowing fluids or gases by means of perforated sheet straining element. Often recommended to use where the solid % is less in quantity. The dirt or foreign particle holding capacity is less than compared to basket strainers. These strainers are very compact and can be used in horizontal or vertical lines. But care should be taken the screening element is on the downside of the strainer body so that the entrapped solids can be properly collected.

Salient Features

  • Advanced hydrodynamic flow path & large filtration area ensure low pressure drop
  • Effective cleaning of fluid avoids damage to downstream valves due to dirt.
  • Can be installed in horizontal and vertical position.
  • Easy cleaning and replacement of screening element.
  • Compact size and low weights.
noqtyDescription STD M.O CONST
11BODYC.I 210 Gr 25
21MESHSS304
31COVERC.I. 210 Gr. 25
44/6FASTENERSC.S.
32MM 40MM 50MM 65MM 80MM 100MM 125MM 150MM 200MM
A 120 140 160 165 190 220 254 280 342
PCD 88 98.5 114 127 148 178 210 235 292
C 14 14 17.5 17.5 17.5 17.5 17.5 17.5 22.0
L 134 190 2.2 221 262 334 356 390 390
T 15 15 16 16 19 19 21 21 21
D 155 200 235 260 310 360 390 450 525

DESIGN AND TESTING STANDARDS

TYPE : FLANGED TYPE
FACE TO FACE DISTANCE :¬†MANUFACTURER’S STANDARD.
FLANGE DRILLING :AS PER BS 10 TABLE D/E,
ANSI B 16.5 , IS , DIN STANDARD.
SIZE RANGE : 32 MM TO 200MM
PRESSURE RATING : PN10/PN16

APPLICATIONS

PAPILLON make Y strainers are used for filtration of liquids , air , gas, steam , and other fluids.

It is extensively used in processing industries , power plant ,HVAS , Petroleum , chemical industries.

Close Menu